Skip to content
GMGlass Measure NYC

Specialized Architectural Glass & Mirror Survey

Glass fails on the opening, not on the order form.

On-Demand White-Label Site Surveys & Laser Measurements across 5 Boroughs of NYC.

Partner With Us
  • OSHA Certified
  • Laser Precision (±1/16")
  • 24–48h Report Delivery
  • COI Ready

Field survey sheet

REV — A

H1H2
+0−1/16"
Dimensional tolerance
±1/16"
Plumb deviation logged
0.5°
Straight to the CNC table
DXF
Drawing turnaround
24–48h

±1/16"

Dimensional tolerance

0.5°

Plumb deviation logged

DXF

Straight to the CNC table

24–48h

Drawing turnaround

Scope of work

Every survey leaves with a number your shop can cut to.

SD-01

Shower & Steam Enclosure Survey

The measurement that decides whether a frameless panel lands clean or comes back as a remake.

  • Curb slope, wall bow and out-of-plumb recorded per jamb
  • Hinge, clamp and header hardware confirmed against your catalogue
  • Notch, hole and cutout positions dimensioned from finished surfaces

AG-02

Architectural Glass & Mirror Survey

Storefront, railing infill, wall mirror and back-painted panels measured against as-built conditions.

  • Template-grade field dimensions for non-rectangular panels
  • Thickness, edgework and tempering requirements noted on the sheet
  • Site access, elevator and hoist constraints flagged before fabrication

FD-03

Fabrication-Ready File Delivery

A survey nobody can cut from is not a survey. You get files your shop opens and runs.

  • DXF per panel, layer-named to your shop convention
  • Dimensioned PDF with tolerances and orientation callouts
  • Photo set keyed to each panel ID

Who we work for

We measure. You fabricate. Nobody meets your customer twice.

01

Shower door e-commerce

Your customer ordered a custom enclosure online and cannot measure it. We go out under your brand and send back numbers your factory can cut to.

02

Glass fabricators

You have the plant, we have the borough. Field verification for jobs you would otherwise turn down for being out of range.

03

Designers & architects

As-built verification before you specify glass, so a beautiful detail survives contact with an old NYC wall.

Job sequence

  1. Scope in

    Panel count, glass type, hardware line, address. Drawings optional.

  2. Access & COI

    Building paperwork issued and tenant window confirmed.

  3. Field survey

    Laser dimensions, plumb and level readings, condition photos.

  4. Files out

    DXF + dimensioned PDF to your fabrication desk in 24–48 hours.

Dispatch & coverage

Where a technician can stand tomorrow.

Manhattan

Below 96th St — COI + building access handled

Brooklyn

Home base — same-day slots most weekdays

Queens

LIC to Jamaica, full residential + commercial

Bronx

Commercial fit-outs and multi-unit portfolios

Staten Island

Scheduled routes, batched to keep cost down

Extended

  • Long Island (Nassau & Suffolk)
  • North New Jersey
  • Lower Westchester

Questions fabricators ask

Do you measure for frameless shower enclosures?

Yes, and it is the bulk of what we do. Curb slope, wall plumb and out-of-square are recorded per jamb, which is where most remakes come from.

Will you measure to our hardware line?

Send the catalogue or part numbers and the survey is dimensioned to that hardware — hinge offsets, clamp positions, header cuts and notch locations included.

Do you take responsibility for the dimensions?

We stand behind the field dimensions we record. Fabrication tolerance and hardware selection stay on your side, and the split is written into the survey sheet so nothing is ambiguous.

Can you template non-rectangular or notched panels?

Yes. Angled returns, notched panels and radius work are captured as field dimensions and delivered as DXF geometry rather than a written description.

Do you install?

No. We measure and document only, which is exactly why fabricators are comfortable sending us to their customers.

Send us the opening you would rather not measure twice.

Accepting B2B Partners for Q3/Q4 2026

Partner With Us